Compare

Glock Parts, Slides, Barrels, Sights & the GRT Forced Reset Trigger

Everything for a Glock or Glock-pattern pistol. AllGoOperators stocks the GRT Glock Reset Trigger, complete optic-cut slides and PSA Dagger slide assemblies, threaded and conversion barrels, tritium night sights, magazines, magwells and grip extensions. Compatible with Gen 1 through Gen 5 Glocks and clones, in stock and ready to ship.

Shop By Part

Every Glock Part, Sorted

A Glock is two halves: the slide assembly on top and the frame with its fire control below. We have grouped the catalog the same way so you can jump to the part you are replacing.

01

Triggers & Lower Parts

Our signature Glock upgrade. The GRT Glock Reset Trigger is a one-piece stainless steel flat-face forced reset trigger for Gen 1 through Gen 4 Glocks and clones (not .22LR models) that installs on your existing trigger bar with a single roll pin. Shop connectors, springs and other frame parts alongside it.

GRT Forced Reset Trigger Triggers & Lower Parts All Forced Reset Triggers
02

Slides & Upper Parts

Drop in a complete optic-cut slide with a ported barrel for a Glock 19, or a PSA Dagger slide assembly with an RMR cut and copper barrel. Complete slides arrive assembled and ready to mount on your frame.

G19 Optic Cut Slide PSA Dagger Slide Slides & Upper Parts
03

Barrels & Muzzle Devices

Threaded barrels for suppressor and compensator use, plus 9mm conversion barrels that turn a Glock 22 or 23 into a 9mm shooter. Finish with a thread protector or compensator from the muzzle category.

G22 9mm Conversion Barrel G23 .40 S&W Barrel Muzzle Brakes & Thread Protectors
04

Sights, Optics & Lights

Tritium night sights in standard and suppressor height for full-size and compact Glocks, ghost ring sights, green night sights for the G17 and G19, and suppressor-height sets for the G42, G43 and G43X. Pair them with a light or laser.

Tritium Night Sights Suppressor Height Night Sights Sights & Optics Lasers & Flashlights
05

Magazines, Magwells & Extensions

Feed the pistol with Glock-compatible magazines, speed reloads with a flared magwell, and add capacity or grip length with magazine and grip extensions.

G26 10rd Magazine Glock Magazines Flared Magwells Grip & Magazine Extensions
Glock Anatomy

Slide Group vs. Frame Group

Knowing which half a part belongs to makes ordering and troubleshooting simpler.

Slide

Slide Assembly

  • Slide Houses the barrel, striker and extractor; optic-cut slides accept a red dot.
  • Barrel Sets caliber; threaded barrels accept suppressors and comps.
  • Recoil spring assembly Returns the slide; generation-specific.
  • Sights Tritium, fiber optic or suppressor height; dovetail front and rear.
  • Striker & extractor Small parts that wear with round count.
Frame

Frame Assembly

  • Trigger & trigger bar The GRT mounts to the factory bar with a 2x8 roll pin.
  • Connector Sets trigger pull weight and reset feel.
  • Locking block & pins Hold the frame together; punch out to service the trigger.
  • Magazine catch Reversible on Gen 4 and later.
  • Magwell & extensions Bolt-on frame accessories for faster reloads and more grip.
Before You Order

Choosing the Right Glock Parts

Generation, model and caliber decide fit.

Know Your Generation

Gen 1 through Gen 5 Glocks differ in trigger housing, recoil spring, magazine catch and slide. The GRT fits Gen 1 to 4 and clones only. Every listing states which generations it fits.

Model Size

Full-size (G17, G22), compact (G19, G23) and subcompact (G26, G43) parts are not interchangeable across sizes. Sights and triggers often cross over; slides, barrels and magazines do not.

Caliber Conversions

A 9mm conversion barrel lets a .40 S&W Glock 22 or 23 run 9mm. You will also need 9mm magazines; the ejector and extractor usually work as-is but some builds benefit from a 9mm ejector.

Optic Cut

Optic-cut slides and RMR-cut Dagger slides use specific footprints. Match the plate or footprint to the red dot you plan to run.

Trigger Legality

Forced reset triggers and the Super Safety are semi-automatic fire control, but rules vary by state and change over time. ALLGOOPERATORS does not ship FRTs to CA, CO, CT, DE, FL, HI, IL, MD, MN, NJ, NV, NY, OR or RI. Confirm that any trigger is legal at your address before ordering and review the shipping restrictions.

Frequently Asked Questions

  • What is the GRT Glock Reset Trigger?

    The GRT is a one-piece, partially skeletonized, flat-face forced reset trigger machined from stainless steel. It fits Gen 1 through Gen 4 Glocks and Glock clones (not .22LR models), mounts to the factory trigger bar with a single 2x8 roll pin, and fires one round per pull with a faster mechanical reset. It sells for $44.99 with quantity pricing available.

  • Do your Glock parts fit Glock clones like the PSA Dagger?

    Many do. The PSA Dagger slide assemblies are Dagger-specific, while sights, magazines, barrels and the GRT are listed with the Glock models and generations they fit. Check the compatibility line on each product page.

  • What is the difference between standard and suppressor height sights?

    Suppressor height sights sit taller so you can see over a suppressor or co-witness with a slide-mounted red dot. Standard height sights are the factory profile. Both are available in tritium.

  • Can I convert my Glock 22 to 9mm?

    Yes. Install a 9mm conversion barrel and use 9mm Glock 17 magazines. Most G22 frames run 9mm reliably with the stock ejector and extractor.

  • Is a forced reset trigger legal in my state?

    Legality varies by state and changes over time. ALLGOOPERATORS will not ship FRTs to CA, CO, CT, DE, FL, HI, IL, MD, MN, NJ, NV, NY, OR or RI. Confirm legality at your address and review our shipping restrictions before ordering.

  • Do Glock parts require an FFL?

    Slides, barrels, triggers, sights and magazines ship directly to you with no FFL required. Shipments of barrels and high-capacity magazines to CA, WA, CT, NJ, New York City or Chicago require an FFL address. Complete frames are firearms and must ship to an FFL.

Recent posts

All Articles